Audio Technica AT-OC9X-EN Moving Coil Phono Cartridge
Audio Technica AT-OC9X-EN Moving Coil Phono Cartridge
Add Recommended Accessories
MY TAKE: The new “X” range of OC9 cartridges from Audio Technica seek to establish new performance benchmarks at their respective price points. Without question, price to performance ratio is off the charts! - Galen Carol
The AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
FEATURES:
SPECIFICATIONS:
Type: Dual Moving Coil
Body Material: Aluminum
Frequency Response: 20-30,000 Hz
Channel Separation : 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output: 0.35 mV (at 1 kHz, 5 cm/sec)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: Elliptical nude
Stylus Type: Nude square shank
Stylus Curvature Radius: 0.3 x 0.7 mil
Cantilever: Aluminum pipe
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil: PCOCC
Terminal Pins: Brass
Mount: Half-inch
Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Accessories Included: Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Mounting Feature: Threaded body
Audio Technica AT-OC9X-EN Moving Coil Phono Cartridge
Add Recommended Accessories
MY TAKE: The new “X” range of OC9 cartridges from Audio Technica seek to establish new performance benchmarks at their respective price points. Without question, price to performance ratio is off the charts! - Galen Carol
The AT-OC9XEN Dual Moving Coil cartridge with nude elliptical stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and pure iron yoke that increase the magnetic energy, and the low-mass nude elliptical stylus on an aluminum cantilever that accurately tracks the record groove. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
FEATURES:
SPECIFICATIONS:
Type: Dual Moving Coil
Body Material: Aluminum
Frequency Response: 20-30,000 Hz
Channel Separation : 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output: 0.35 mV (at 1 kHz, 5 cm/sec)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: Elliptical nude
Stylus Type: Nude square shank
Stylus Curvature Radius: 0.3 x 0.7 mil
Cantilever: Aluminum pipe
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
Wire Used for Coil: PCOCC
Terminal Pins: Brass
Mount: Half-inch
Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D
Accessories Included: Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Mounting Feature: Threaded body